Rapid-setting, cementitious roadway repair mortar engineered for underground mining & tunnelling environments.
Technical Data
Note: These values are typical and subject to change based on manufacturing conditions. Performance-based properties, such as compressive strength and set times, are highly dependent on amount of mix water, ambient and water temperature, substrate conditions, base preparation, etc.
| Property | Typical Value | Test Method/Standard |
|---|---|---|
|
Initial Set Time |
10 minutes |
Field Trials |
|
Foot Traffic |
10 to 20 minutes |
Field Trials |
|
Light Duty Traffic (e.g., 4WD Ute; Driftrunner) |
30 to 60 minutes |
Field Trials |
|
Heavy Duty Traffic (e.g., Shuttle Car; Jumbo) |
2 hours |
Field Trials |
|
Extreme Duty Traffic (e.g., Continuous Miner) |
8 hours |
Field Trials |
Product Description
MineRoad-Rapid is a rapid-setting, cementitious roadway repair mortar engineered for …
Read More
MineRoad-Rapid is a rapid-setting, cementitious roadway repair mortar engineered for underground mining and tunnelling environments. Purpose-built for quick return-to-service in wet or water-nuisance areas and where conventional concrete mixing equipment is unavailable or impractical.Designed as a dry-blend to absorb standing water and achieve rapid early strength with little to no mixing, BMS MineRoad-Rapid can be used to reinstate potholes and mudholes, restore traction for foot, wheeled, and tracked traffic, and reduce operational delays.
Features & Benefits
Rapid Set & Early Strength: Minimum operational downtime and quick traffic…
Read More
- Rapid Set & Early Strength: Minimum operational downtime and quick traffic reinstatement.
- Water-Tolerant Placement: Pour directly into standing water; typically only light agitation needed.
- High Flow or Trowel-Finishable: Consistency to suit pothole and mudhole infilling and surface profiling.
- Simple Application: No batching plant required.
Typical Applications
Rehabilitation of underground mine roadways, travel-ways, and sump approaches….
Read More
- Rehabilitation of underground mine roadways, travel-ways, and sump approaches.
- Filling potholes, rills, depressions, and persistent wet/slippery areas (“mudholes”).
- Spot-level corrections at intersections, boot-wash areas, and equipment parks.
Packaging
Typically, 1.2 tonne bulk bags.Additional packaging options are available…
Read More
- Typically, 1.2 tonne bulk bags.
- Additional packaging options are available on request.
- All orders include Proof of Dispatch (POD) documentation with batch identification numbers and manufacturing dates for traceability.
Shelf-Life & Storage Conditions
Shelf-Life: Best used within 6 months from the date of manufacture when stored as…
Read More
Shelf-Life: Best used within 6 months from the date of manufacture when stored as recommended. Product may be fit for purpose beyond 6 months, subject to assessment of storage conditions and verification testing of mortar properties.
Storage Conditions: Store unopened and undamaged packages in a cool, dry environment below 30°C. Shelf-life may decrease if exposed to high humidity, extreme temperatures, or external weather conditions.
Safety Information
Cement dust is an irritant—avoid inhalation or skin/eye contact, Wear protective gloves, clothing, eye….
Read More
- Cement dust is an irritant—avoid inhalation or skin/eye contact.
- Wear protective gloves, clothing, eye and face protection.
- Ensure adequate ventilation during mixing and application.
- In case of contact with the eyes, rinse with running water for 15 mins and remove contaminated clothing.
- Always consult the Safety Data Sheet (SDS) prior to handling or use.
- In an emergency, contact any Poisons Information Centre (Phone: 13 11 26 within Australia).