Contact Us

Ready-to-use dry powder formulated as a sprayed mortar for wet-mix/wet-spray placement in mining, tunnelling, and civil construction applications.

Contact Us

Technical Data

Note: The stated UCS and flexural strength values are typical of in-house testing conducted on 50 mm cubes and 40 × 40 × 160 mm prisms, respectively, mixed using Toowoomba Regional Council potable water at a 0.150:1 water-to-solids (w:s) ratio, cast in steel moulds, and submerged-cured at 23°C. Performance-based properties, such as strength, gel time, and bleed, are highly dependent on w:s ratio, mixer and pump type, addition of admixtures, and end-user application.

Property Typical Value Test Method/Standard
5-Hour UCS
1 MPa
N/A
1-Day UCS
15 MPa
N/A
3-Day UCS
25 MPa
N/A
7-Day UCS
30 MPa
N/A
28-Day UCS
45 MPa
N/A
7-Day Flexural
5 MPa
N/A
28-Day Flexural
7 MPa
N/A

Product Description

BetterShot is a ready-to-use dry powder formulated as a sprayed mortar for wet-mix/wet-spray placement in …

BMS BetterShot is a ready-to-use dry powder formulated as a sprayed mortar for wet-mix/wet-spray placement in mining, tunnelling, and civil construction applications.

Engineered for pumpability, buildability, and adhesion, BMS BetterShot is a cost-effective and time-saving alternative to conventional shotcretes and gunites.

Features & Benefits

 Versatile Application: Suitable for vertical, overhead and horizontal sprayed ventilation seals and stoppings, as wel…

  •  Versatile Application: Suitable for vertical, overhead and horizontal sprayed ventilation seals and stoppings, as well as general ground stabilisation and support in underground mines and tunnels.
  •  Steady Strength Gain: Reliable compressive strength development.
  •  Minimal Rebound: Reduced wastage.
  •  Safe: Non-toxic and non-flammable.

Typical Applications

Construction and repair of ventilation seals and stoppings in underground coal mines …

  • Construction and repair of ventilation seals and stoppings in underground coal mines.
  •  Ground stabilisation of underground mine roadways, e.g., coal ribs and roof strata.
  •  Ground stabilisation of civil infrastructure, e.g., tunnel linings, road-cuttings, embankments, etc.
  • Concrete mortar repair of civil infrastructure, e.g., bridges, abutments, foundations, marine structures, pipework, tunnels, etc.

Packaging

Typically, 1.2 tonne bulk bags.Additional packaging options are available…

  •  Typically, 1.2 tonne bulk bags.
  •  Additional packaging options are available on request.
  •  All orders include Proof of Dispatch (POD) documentation with batch identification numbers and manufacturing dates for traceability.

Shelf-Life & Storage Conditions

Shelf-Life: Best used within 6 months from the date of manufacture when stored as…

Shelf-Life: Best used within 6 months from the date of manufacture when stored as recommended. Product may remain fit for purpose beyond 6 months, subject to assessment of storage conditions and verification testing of mortar properties.

Storage Conditions: Store unopened and undamaged packages in a cool, dry environment below 30°C. Shelf-life may decrease if exposed to high humidity, extreme temperatures, or external weather conditions.

Safety Information

Cement dust is an irritant—avoid inhalation or skin/eye contact, Wear protective gloves, clothing, eye….

  • Cement dust is an irritant—avoid inhalation or skin/eye contact.
  •  Wear protective gloves, clothing, eye and face protection.
  • Ensure adequate ventilation during mixing and application.
  •  In case of contact with the eyes, rinse with running water for 15 mins and remove contaminated clothing.
  •  Always consult the Safety Data Sheet (SDS) prior to handling or use.
  •  In an emergency, contact any Poisons Information Centre (Phone: 13 11 26 within Australia).